P2S21AJDA032, 2PC SS PNEU DA

Valve Size 1/4 in
Port Opening Size 1/4
Pneumatic Actuator Type Double Acting
CROSS REFERENCE ITEM PHS21AJD01
Series P2S
Operator Actuator
Actuator Type HP032DA
Valve Type Ball
Thread Type FNPT
Operating PSI(D) 500 psi
Valve Body Material Stainless Steel
Valve CWP 1000 psi
Valve Construction Stainless Steel
Porting Style Full
Stem Seal Type PTFE/Viton®
Temperature Range - Media -4 to 392 ºF
Body Finish Stainless Steel
Temperature Range - Ambient -4 to 176 ºF
Ball Material 316 Stainless Steel
Body Style 2 Piece
Seat Material RTFE/PTFE
Number of Ports 2
Seal Type PTFE/Viton
Stem Material 316 Stainless Steel
A Dimensions 2.95 in
C Dimensions 0.31 in
Application Agricultural and Food Processing, Alternative Energy and Fuel Production, Bulk Product Movement, Chemical Processing, Compressed Air Services, Condensate Removal, Coolants, Effluent Lines, Degreasing, Pickling, Plating, Washdown, Demineralizers, Dewatering and Sludge Movement, Filtration Systems, Hydraulic/Pneumatic Systems and Lifts, Ink Spraying and Cleaning, Line Purge, Machine Cooling, Mixing, Filling, Material Flow, Municipal Service, Natural Gas and Oil Production, Solid and Liquid Waste Control, Steel Mills, General Chemical Applications
Valve Features
  • Full Port
  • Stainless Steel (ASTM A351-CF8M) Investment Cast Body
  • RTFE Seats, PTFE/Viton® Stem Seals
  • Stainless Steel Ball and Bottom Loaded Stem
  • Available in 1/4" – 3" FNPT Ends
  • 1000 PSI WOG, 125WSP Sized for 500psid (1/4"-1") 300 psid (1 1/4"-3") media.
Actuator Features
  • Quarter-Turn, high cycling, rack and pinion, air-operated Actuators
  • Available in Double Acting and Spring Return (Fail Open or Fail Close)
  • Optional Pilot Solenoids to control air flow via PLC panel or other electric signal
  • Valve Position Limit Switch (NEMA 4, 4X) to provide local and remote indication of valve position (2 SPDT switches)
  • Life-time lubricated, -4 to 176 deg F (Low Temp and High Temp also available)
REPLACEMENT OR OBSOLETE ITEM REPLACEMENT

The P2S DynaMatic Series of high-cycling pneumatically actuated stainless steel valves are engineered and manufactured to handle severe service applications, yet are economical enough for everyday general chemical flow control. DynaQuip’s pioneering direct mount valve design is compact and eliminates the need for brackets which reduces side-loading or other misalignment concerns.

These pneumatically automated valves are available with double acting or spring return (specify fail-open or fail-close action). Additional actuator accessories include NEMA 4, 7 or 9 Pilot Solenoid Valves (115 VAC, 220 VAC, 24 VAC, 24 VDC, and 12 VDC voltages), Valve Position Limit Switches and Speed Controls. All models are pre-sized for clean water, air, or light oil applications. Contact us for severe service or special actuator options.